Machines Home | Listings Search | Listings by Category | Listings by Manufacturer

Machines by Category
All Listings > 


sort by: best match | lowest to highest | highest to lowest
Used Machine Listings
 
DOUCET - WR-6 6' WIDE WALL RACK
Print Item Email this machine to a friend
List Price: $3,750.00
Condition: CLEANED/CHECKED
Machine Stock Number: 7083
Member Stock Number: CF020010473
Serial Number: 7006-04-141
DD: D

Description:
Used Doucet Model WR-6 6 Foot Wide Wall Rack; complete with 2-1/2" high x 40" opening clamps (#992088 Rapid Style), with two (2) Doucet Model WRE-6 6 foot Wall Rack Extensions to give a total width capacity of 18 feet with four gluing levels; with twenty-two (22) of the Rapid Style Clamps and with all related equipment. Serial Number: 7006-04-141. (New 2006.)
Click for Large Image
 Print Item

Used National Machine Listings
 
HANDY - 124-554 PNEUMATIC FRAME CLAMP, US0196
Print Item Email this machine to a friend
List Price: $4,500.00
Condition: ATFS
Machine Stock Number: US0196
Member Stock Number: CF290009841
Serial Number: K2XG
DD: D
Machine ID: US0196

Description:
Handy Model 124-554 Pneumatic Frame Clamp in very good condition.

Clamps frames and doors at a perfect 90 degrees.

Draws, squares and pneumatically clamps in both directions.

Working capacity: 9" X 14" Minimum--48" X 66" Maximum
Click for Large Image
 Print Item

 
RFS-PROTECH - PT-7 RFS PROTECH MODEL PI-7 RADIUS FORMING CLAMP
Print Item Email this machine to a friend
2002
List Price: $25,000.00
Condition: ATFS
Machine Stock Number: 10961
Member Stock Number: CF070008676
Serial Number: HMC10961
DD: D

Description:
Used RFS ProTech Model PT-7 Radius Forming Clamp. ProTech radius formers are the modern way to fabricate curved laminates such as arched headers and radiused mouldings for windows and doors. Utilizing their patented technology they eliminate the traditional method of building and storing wooden forms. The PT-7 radius former uses a series of machined tails supporting dual sets of aluminum arms, which are adjusted to define the pattern to be fabricated. The provided computer program is used to set-up parameters. The software guides the user through a series of questions (shape diameter, springback, etc) that geometrically define the pattern. The software then calculates the exact position for each aluminum arm and generates a printout to aid the operator in manually positioning the arms. The laminates (veneers) are clamped to the form arms with a series of 32 specially designed pnuematic clamps. Compressed air at presssures up to 150 PSI is connected to the clamp via a quick disconnect. Specifications: Maximum part length is 120" Standard part height of 54" Maximum Width: 7" Maximum part thickness: 4-1/2" Approx. Year Mfg: 2002 New Replacement cost $40,000
Click for Large Image
 Print Item